IT Certification and Career Paths-642-691-Cisco Systems

admin — Mon, 23 Nov 2009 01:29:22 +0000

Cisco 642-691 Certification Exam, a component part of the CCIP BGP + MPLS Exam (BGP + MPLS), is the only way to a perfect professional life as an IT candidate.
Killtest 642-691 contains all the knowledge points required in the Cisco 642-691 Certification Exam. It will be updated in time according to the change of the real exam to make sure that our customers get the most valuable material for the exam. There is no need for our customers to buy other sources.
If you are unconfident about our Killtest 642-691, you have the right to test it. We have free demo online and free demo download. It’s up to you to choose any one of the two ways to test our product’s quality.
The Killtest 642-691 is updated on schedule according to the change of the real exam to make sure that the question coverage is always above 95% and that our customers get the valuable material for the examination. We will inform the corresponding customers to download the updated version in order to make sure all the customers pass the exam smoothly.
The quality of the Killtest 642-691 has been tested by thousands of IT examiners who have passed the exam successfully with our product. These who did an excellent job in the Cisco 642-691 Certification exam also had given advices to perfect our product.
When you are browsing on our Killtest 642-691, if you have any questions, please feel free to ask us on the CONTACT US page or by our Live Chat service. A professional pre-sale and post-sale team is waiting for you in hoping that we can provide you with the convenience and help for the preparation of examination.
Before you buy our Killtest CCIP 642-691, you can have a try on our free demo online or downloaded to test its quality and value. You will find that it is the right one you are seeking for.
If you unfortunately failed to pass the Cisco 642-691 Certification exam, and only if you used our Killtest 642-691 for the first time, we are bound to protect your interests with 100% money back for your fee to buy our product. We have 100% Pass Guarantee to make sure that your interests are subject to no loss.

CCIP certification (642-611 MPLS configure)

admin — Sat, 21 Nov 2009 00:43:39 +0000

No. 642-611 for the Implementing Cisco MPLS certification exam will test the skills of those below.
Cisco originally developed the type of MPLS technology, and the technology known as label switching. Later this technology for the development of MPLS Label Switching. CCIP exam to understand the requirements of the Cisco Label Switching MPLS, as well as instruction instructions. Label Switching MPLS configuration and instructions will appear in the examination.
MPLS service routers configured to send a variety of components. Must set the standard routing protocols to ensure that the carrier edge (PE) routers and carrier (P) between the router can communicate with each other. BGP (Border Gateway Protocol) devoted to the PE router, so that users to exchange routing information. In addition to IP routing, the router must exchange label and the establishment of Label Switching channels, and routing information to the user into a virtual routing and forwarding.
Please pay close attention to the syntax, because the test will ask you to enter or identify the IOS command.
Open the label or tag exchange
In order to open the Label Switching, you have to set up CEF (Cisco EXPress Forwarding, Cisco Fast forward) and told the router label release. In addition, each interface must enable the label switching. In order entered on the router to use the word bold.
Label exchange settings
P1 (config) # ip cef
P1 (config) # tag-switching advertise-tag
P1 (config) # interface serial 0
P1 (config-if) # tag-switching ip
MPLS set
P1 (config) # ip cef
P1 (config) # mpls ip
P1 (config) # interface serial 0
P1 (config-if) # mpls ip
The request is set to start routers exchange and the establishment of labels Label Switching MPLS across the channel in order to transmit communications lines. Once the open exchange of MPLS labels or functions, routers and found that neighbors began to label switching. Label Switching neighbors for the use of UDP, TCP port 711 for the use of label switching. MPLS also exchange the use of UDP for neighbors, but rely on the label distribution protocol Label Switching.
Set in Router implementation of the neighbors and found Label Switching, to verify the process of instruction has been successfully completed, and shows are as follows:
Neighbors verified
TAG
P1 # show tag-switching tdp-neighbor
MPLS
P1 # show mpls ldp neighbor
These instructions will show that the output of the identity of neighbors (in the form of IP addresses) and the neighbor state. Need to pay attention to the crucial point is to enter the other’s identity and status. The other side of the state should be OPER.
Other important instructions
MPLS configure verified at the appropriate interface has been opened
TAG
P1 # show tag-switching interfaces
MPLS Verification
P1 # show mpls Interface
To verify the proper display interface
Verify label / tag and release bindings
TAG
P1 # show tag-switching tdp discovery
P1 # show tag-switching tdp bindings
MPLS Verification
P1 # show mpls ldp discovery
P1 # show mpls ldp bindings
1. TDP to verify or find the source of LDP labels
2. Verification IP routing are bound to their labels.

IT認證 » CCIP

IT Certification and Career Paths-642-691-Cisco Systems

CCIP certification (642-611 MPLS configure)